Complete Mold Inspection

The Complete Mold Inspection is performed in accordance with the Mold Inspection Standards of Practice of the International Association of Certified Indoor Air Consultants.

The inspection consists of:

•  a non-invasive, visual examination of the readily accessible, visible, and installed systems and components of the building, as outlined in the IAC2 Mold Inspection Standards of Practice;
• moisture, temperature and humidity measurements;
• at least three air samples (one indoor and two outdoor); and
• possibly one surface sampling at an area of concern.

The inspector reports:

• moisture intrusion;
• water damage;
• musty odors;
• apparent mold growth;
• conditions conducive to mold growth;
• the results of a laboratory analysis of all mold samplings taken at the building; and
• any system or components listed in the Standards of Practice that were not visually examined, and
• the reasons they were not inspected.

Unless the inspector and client agree to a limitation of the inspection, the inspection will be performed on the primary building and parking structure